Wednesday, December 11, 2019

A NOVEL HYBRID OPPORTUNISTIC SCALABLE ENERGY EFFICIENT ROUTING DESIGN FOR LOW POWER, LOSSY WIRELESS SENSOR NETWORKS

Jayavignesh Thyagarajan and Suganthi K

School of Electronics Engineering, Vellore Institute of Technology, Chennai Campus, India

Abstract 

Opportunistic Routing (OR) scheme increases the transmission reliability despite the lossy wireless radio links by exploiting the broadcast nature of the wireless medium. However, OR schemes in low power Wireless Sensor Network (WSN) leads to energy drain in constrained sensor nodes due to constant overhearing, periodic beaconing for Neighbourhood Management (NM) and increase in packet header length to append priority wise sorted Forwarding Candidates Set (FCS) prior to data transmission. The timer-based coordination mechanism incurs the least overhead to coordinate among the FCS that has successfully received the data packet for relaying the data in a multi-hop manner. This timer-based mechanism suffers from duplicate transmissions if the FCS is either not carefully selected or coordinated. The focus of this work is to propose a hybrid opportunistic energy efficient routing design for large scale, low power and lossy WSN. This design avoids periodic 'hello' beacons for NM, limits constant overhearing and increase in packet header length. There are two modes of operation i) opportunistic ii) unicast mode. The sender node adopts opportunistic forwarding for its initial data packet transmission and instead of pre-computing the FCS, it is dynamically computed in a completely distributed manner. The eligible nodes to be part of FCS will be neighbour nodes at lower corona level than the sender with respect to the sink and remaining energy above the minimum threshold. The nodes part of FCS based on crosslayered multi-metrics and fuzzy decision logic determines its priority level to compute Dynamic Holding Delay (DHD) for effective timer coordination. The differentiated back off implementation along with DHD enables the higher priority candidate that had received data packet to forward the packet first and facilitates others to cancel its timer upon overhearing. The sender node switches to unicast mode of forwarding for successive transmissions by choosing the forwarding node with maximum trust value as it denotes the stability of the temporally varying link with respect to the forwarder. The sender node will revert to opportunistic mode to increase transmission reliability in case of link-level transmission error or no trustworthy forwarders. Simulation results in NS2 show significant increase in Packet Delivery Ratio (PDR),decrease in both average energy consumption per node and Normalized Energy Consumption (NEC) per packet in comparison with existing protocols.

Keywords 

Routing, Opportunistic, Energy Efficiency, fuzzy logic, scalability, communication protocol design

                       

                                                  Full Text

No comments:

Post a Comment