MITIGATING INTERFERENCE TO GPS OPERATION USING VARIABLE FORGETTING FACTOR BASED RECURSIVE LEAST SQUARES ESTIMATION

Aseel AlRikabi and Taher AlSharabati 

Al-Ahliyya Amman University/Electronics and Communications Engineering Department, Jordan

ABSTRACT 

In this paper, an interference method based on signal processing is proposed. The approach is based on utilizing the maximum likelihood properties of the received signal. The approach is built on maximizing the probability of the desired data. The GPS data, which is constructed using Binary Phase Shift Keying (BPSK) modulation, is transmitted as “1’s” and as “0’s.” carried on 1575.42MHz carrier called the L1 frequency. The statistics of the GPS data and interference are utilized in terms of their distribution and variance. The statistics are used to update (adaptively) the forgetting factor (Lambda) of the Recursive Least Squares (RLS) filter. The proposed method is called Maximum Likelihood Variable Forgetting Factor (ML VFF). The adaptive update takes on assigning lambda to the maximum of the probabilities of the symbols based on the statistics mentioned. 

KEYWORDS 

Global Positioning System GPS, Recursive Least Squares (RLS) algorithm, Forgetting Factor (λ), interference, OTA carrier  

More Details....

THE EFFECT OF SEEKING OPERATION ON QOE OF HTTP ADAPTIVE STREAMING SERVICES

Toshiro Nunome and Hiroaki Tani1 

1Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan 

ABSTRACT 

In this paper, we assess multidimensional QoE (Quality of Experience) of HTTP-based streaming services in seeking operation to evaluate the effect of two transmission schemes: adaptive bitrate streaming and progressive download. We perform a subjective experiment with two contents and various network load conditions. In the experiment, subjects find pre-specified scenes by means of seeking the video as they want to see the scenes right now. We also perform the principal component analysis for the assessment result of multidimensional QoE. We then find that the adaptive bitrate streaming is not necessarily effective for QoE enhancement; the effectiveness of the scheme depends on the usage of the system and network conditions. 

KEYWORDS

 Audio and Video Transmission, QoE, Adaptive Bitrate Streaming, Progressive Download 

More Details.....

DELAY-POWER PERFORMANCE COMPARISON OF MULTIPLIERS IN VLSI CIRCUIT DESIGN

 Sumit Vaidya1 and Deepak Dandekar2
1Department of Electronic & Telecommunication Engineering, OM College of Engineering, Wardha, Maharashtra, India
2Department of Electronic Engineering, B. D. College of Engineering, Wardha, Maharashtra, India

 Abstract

A typical processor central processing unit devotes a considerable amount of processing time in performing arithmetic operations, particularly multiplication operations. Multiplication is one of the basic arithmetic operations and it requires substantially more hardware resources and processing time than addition and subtraction. In fact, 8.72% of all the instruction in typical processing units is multiplication. In this paper, comparative study of different multipliers is done for low power requirement and high speed. The paper gives information of “Urdhva Tiryakbhyam” algorithm of Ancient Indian Vedic Mathematics which is utilized for multiplication to improve the speed, area parameters of multipliers. Vedic Mathematics suggests one more formula for multiplication of large number i.e. “Nikhilam Sutra” which can increase the speed of multiplier by reducing the number of iterations. 

Keywords 

Multiplier, Vedic Mathematics, VLSI design 

More Details....

THE QUANTIZED DIFFERENTIAL COMPARATOR IN FLASH ANALOG TO DIGITAL CONVERTER DESIGN

Meghana Kulkarni1 , V. Sridhar2 , G.H.Kulkarni3

 1Asst.Prof., E & C Dept, Gogte Institute of Technology, Bgm, Karnataka, India. 

2 Principal, P.E.S. College of Engineering, Mandya, Karnataka, India. 

 3 Prof and Head, E & E Dept, Gogte Institute of Technology, Bgm, Karnataka, India 

ABSTRACT 

This paper proposes a Flash Analog to Digital Convsrter design based on the use of a Quantized Differential Comparator. The formulation explores the use of a systematically incorporated input offset voltage in a differential amplifier for quantizing the reference voltages necessary for Flash ADC architectures, thus eliminating the need for a passive resistor array for the purpose. This work is an attempt to extend the TIQ method, which uses systematic sizing of devices in a conventional CMOS inverter to accomplish the same. The formulation allows very small voltage comparison and complete elimination of resistor ladder circuit. The design has been carried out for the TSMC 0.18u technology at MOSIS. 

 KEYWORDS

 TIQ, Analog to Digital Converter.




More Details......

A 60 GHZ ANALOG PHASE SHIFTER IN 65 NM BULK CMOS PROCESS

 ETB.Samuel Jigme Harrison and Zhang Yue Ping 

Department of Electrical and Electronic Engineering, Nanyang Technological University, Singapore - 639798 

 ABSTRACT 

A 60 GHz Analog Phase Shifter in 65nm bulk CMOS process has been explored for microwave frequency applications. It is an analog phase shifter with three transistors in the form of an active circulator and a LC network to attain the desired phase shift. This phase shifter is designed to work at a high frequency of 60 GHz to attain phase shift range of 140o . The proposed phase shifter works at supply voltage lower than 2.5 V. The phase shifter exhibits low insertion loss of 3.73 dB and low power consumption which is a challenging result for circuits working in microwave frequencies. 

KEYWORDS 

60 GHz phase shifter, 65 nm CMOS, Active circulator


More Details...

COMPARATIVE INVESTIGATION FOR ENERGY CONSUMPTION OF DIFFERENT CHIPSETS BASED ON SCHEDULING FOR WIRELESS SENSOR NETWORKS

 Monica1 and Ajay K Sharma2 

Department of Computer Science and Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab 

ABSTRACT 

Rapid progress in microelectromechanical system (MEMS) and radio frequency (RF) design has enabled the development of low-power, inexpensive, and network-enabled microsensors. These sensor nodes are capable of capturing various physical information, such as temperature, pressure, motion of an object, etc as well as mapping such physical characteristics of the environment to quantitative measurements. A typical wireless sensor network (WSN) consists of hundreds to thousands of such sensor nodes linked by a wireless medium. In this paper, we present a comparative investigation of energy consumption for few commercially available chipsets such as TR1001, CC1000 and CC1010 based on different scheduling methods for two types of deployment strategies. We conducted our experiment within the OMNeT++ simulator. 

Keywords 

 Wireless Sensor Networks, Scheduling Methods, Deployment, OMNeT++.

More Details...............

A Cluster Based Replication Architecture for Load Balancing in Peer-to-Peer Content Distribution

S.Ayyasamy1 and S.N. Sivanandam2

 1Asst. Professor, Department of Information Technology, Tamilnadu College of Engineering Coimbatore-641 659, Tamil Nadu, INDIA. 

 2 Professor and Head, Department of Computer Science and Engineering, PSG College of Technology, Peelamedu, Coimbatore-641 004, Tamil Nadu, INDIA. 

Abstract

 In P2P systems, large volumes of data are declustered naturally across a large number of peers. But it is very difficult to control the initial data distribution because every user has the freedom to share any data with other users. The system scalability can be improved by distributing the load across multiple servers which is proposed by replication. The large scale content distribution systems were improved broadly using the replication techniques. The demanded contents can be brought closer to the clients by multiplying the source of information geographically, which in turn reduce both the access latency and the network traffic. In addition to this, due to the intrinsic dynamism of the P2P environment, static data distribution cannot be expected to guarantee good load balancing. If the hot peers become bottleneck, it leads to increased user response time and significant performance degradation of the system. Hence an effective load balancing mechanism is necessary in such cases and it can be attained efficiently by intelligent data replication. In this paper, we propose a cluster based replication architecture for load-balancing in peer-to-peer content distribution systems. In addition to an intelligent replica placement technique, it also consists of an effective load balancing technique. In the intelligent replica placement technique, peers are grouped into strong and weak clusters based on their weight vector which comprises available capacity, CPU speed, access latency and memory size. In order to achieve complete load balancing across the system, an intracluster and inter-cluster load balancing algorithms are proposed. We are able to show that our proposed architecture attains less latency and better throughput with reduced bandwidth usage, through the simulation results. 

Keywords 

Replica, Overlay, Clusters, QoS, Content, Routing


More Details....